S315MC cold rolled sheet material sheet stockist in China

We are world class steel materials supplier. We are engaed in providing raw steel materials such as S315MC cold rolled sheet material steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to cli

We are world class steel materials supplier. We are engaed in providing raw steel materials such as S315MC cold rolled sheet material steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients. We guarantee to return goods for free for quality problem during its lifetime. Your satisfactory is our permanent pursue. We always welcome advise from clients to make self-improvement continously. And sincerely to build S315MC cold rolled sheet material long-term cooperation with you.

ASTM A213 T9 seamless pipe is ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes. BBN steel company supplies Cr-Mo low alloy steel grades of T2, T5, T5b, T5c, T9, T11, T12, T17, T21, T22, T23, T24, T36, T91, T92, T122, and T911. The tubing sizes and thickness usually furnished to this specification are 1/8″(3.2 mm) in inside diameter to 5″(127 mm) in outside diameter and 0.015″ to 0.500″(0.4-12.7 mm) in minimum or average wall thickness.

Corrosion resistant steel plate, as a new generation of advanced steel material, has 2-5 times of atmospheric corrosion resistance as ordinary carbon steel such as S315MC cold rolled sheet material, and the longer the service time, the more prominent the corrosion resistance. Due to its characteristics of rust resistance, coating free, thinning and consumption reduction, labor saving and energy saving, corrosion resistant steel plate can be applied to steel structures exposed to the atmosphere for a long time, such as buildings, vehicles, bridges, towers, etc., and can also be used to manufacture structural parts such as containers, railway vehicles, oil derricks, seaport buildings, oil production platforms, etc.

The preparation of S315MC cold rolled sheet material galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for S315MC cold rolled sheet material centralized control, two-layer welding process, reducing the possibility of incomplete penetration.

S315MC cold rolled sheet material, 15CrMo alloy steel is Chinese material. It is characterized by high Chrome and Molybdenum contents. The 15CrMo alloy steel chrome content is 0.80-1.10, and molybdenum content is 0.40-0.55. Besides, 15CrMo carbon content is 0.12-0.18, silicon content is 0.17-0.37, manganese content is 0.40-0.70. The heating temperatures for quenching and tempering of 15CrMo alloy steel are 900 and 650 centigrade respectively. The yield point of 15CrMo alloy steel is 295Mpa.

Our company will accept the product quality objection registration record, pass it to the S315MC cold rolled sheet material production unit and relevant departments, and timely coordinate the supervision of product S315MC cold rolled sheet material quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.