Quenched and tempered din en 10149-2 specs

Our company specializes in the production of steel plates, steel coil, steel sections, welded pipes and seamless pipes products, sales of GB, ASME, ASTM, JIS, DIN, EN, API and other standards and specifications of steel din en 10149-2 and deep-processed p

Our company specializes in the production of steel plates, steel coil, steel sections, welded pipes and seamless pipes products, sales of GB, ASME, ASTM, JIS, DIN, EN, API and other standards and specifications of steel din EN 10149-2 and deep-processed products, facing the domestic and foreign markets, welcome to call for inquiries. It is a modern high-tech professional enterprise integrating scientific research, production and sales.

Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the din en 10149-2 steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the din en 10149-2 steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the din en 10149-2 steel sheet on the truck Good luck.

"Our mill has three production lines:1).2500mm production line (Width: 1600-2300mm, din en 10149-2 Thickness: 6-30mm, Annual capacity: 1,600,000 Tons; 2).3500mm production line (Width: 2000-3050mm, Thickness: 10-80mm, Annual capacity: 2,000,000 Tons; 3).4300mm production line (Width: 1500-4100mm, Thickness: 6-300mm, Annual capacity: 1,800,000 Tons; The weight of each ingot can reach din en 10149-2 44 tons, which is at the leading level in China. In addition, we have a 1700mm hot-rolled coil production line (width range: 900-1550mm, thickness range: 1.2-25.4mm, annual din en 10149-2 production capacity: 3.5 million tons."

In November of 2015, Thailand one company contacted with us from Internet. They are find the trustable supplier of S355J2H seamless pipe din en 10149-2 for there cable car supporter. Due to the special using of the pipes, they are very careful and servious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and proucts quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1400 tons pipe to us directly.

din en 10149-2, Q690 steel is low alloy high strength steel. It belongs to the Chinese GB standard steel. Q690 steel is named after its yield strength value. Q is the abbreviation of yield strength, that is, the yield strength of Q690 steel is 690 MPa. Chemical composition of Q690 steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 1.00, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. The mechanical properties of Q690 steel are: yield strength ≥ 690 MPa, tensile strength 730-940 MPa, elongation after fracture ≥ 14%, impact energy 31J.

Integrity based:To customers, we should value our credit and keep our good image forever.To colleagues: respect each other, trust each other, make efforts togetherService first:Customer satisfaction is always the first pursuit.The company provides customers with not only advanced technology and high-quality din en 10149-2 products, but also the spirit of credit and service.Innovation:We are good at learning, drawing on the strengths of all, innovating and developing, introducing, researching and developing the latest technology, and making our products have a stronger vitality.