Points for attention in S960MC with EN10204-3.1 certificate cutting

The company was established in 2000, covering an area of more than 4,500 acres. It has fixed assets of 200 million yuan, and employs more than 1,200 people. It has now formed coking, sintering, white ash, pellets, ironmaking, S960MC with EN10204-3.1 certi

The company was established in 2000, covering an area of more than 4,500 acres. It has fixed assets of 200 million yuan, and employs more than 1,200 people. It has now formed coking, sintering, white ash, pellets, ironmaking, S960MC with EN10204-3.1 certificate steelmaking, steel rolling, oxygen production, gas and waste heat The complete circular economy industrial chain including power generation, comprehensive utilization of slag, soot and dust treatment, sewage treatment and recycling, etc. It mainly produces hot-rolled steel plates and S960MC with EN10204-3.1 certificate carbon structural steels, high-quality carbon structural steels, low-alloy high-strength steels, medium and wide-band steels for cold-rolled stamping, and hot-rolled coils.

Low alloy steel plate, refers to the steel plate whose alloy content is less than 3.5%. The most popular low alloy steel plate is S960MC with EN10204-3.1 certificate, Q345B plate and its equivalent materials such as s355jr, A572 grade 50 and so on. Low alloy steel plate plays an important role in the construction, it must have enough strength and stability to bear the safety of the house. Low alloy steel plate is often used in large buildings with large bearing capacity and good cross-section stability, such as bridges, ships, lifting and transportation machinery, etc.

If a destructive accident occurs during the use of the boiler, it will cause serious losses. Therefore, other than some common strengths with S960MC with EN10204-3.1 certificate, the boiler steel plate must have good physical properties, mechanical properties and workability, and be strictly specified in the technical terms of the material standard to meet its safety in use. High temperature (above creep temperature) boiler steel plates are generally low-alloy heat-resistant steels, such as chromium molybdenum steel, chromium molybdenum vanadium steel, chromium molybdenum tungsten steel, etc.

keyword} product plate production process:
Raw materials (scrap steel, pig iron and molten iron) → electric furnace (100 tons electric arc furnace smelting) → converter → LF furnace molten steel refining treatment → VD or VOD furnace molten steel vacuum treatment → die casting (various key die casting lines) or continuous casting (large Slab caster) (50 tons of slab electroslag furnace for remelting a steel ingot) → heating (continuous furnace and soaking furnace) → steel plate rolling (4100 and 4200mm rolling mills) → steel plate heat treatment (normalizing and tempering) Quality) →Steel plate cutting inspection→Inspection

S960MC with EN10204-3.1 certificate, Chinese material Q235B is one of the most widely used carbon steel in the world. Some like to compare its strength with other equivalent steel grades. We need to take care that the Q235B steel strength varies with thickness. For the min. yield strength of Q235B steel plate: it is 235Mpa if thickness ≤16mm, 225 Mpa for thickness 16-40mm, 215 Mpa for thickness 40-60mm, 205 Mpa for thickness 60-100mm, 195 Mpa for thickness 100-150mm, 185 Mpa for thickness over 150mm. The tensile strength of Q235B steel plate is 375-500 Mpa.

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.