Painting steel sheet S460MC steel for earth moving machines

EN10025-3 S420N material is a welded low alloy steel grade. Its mateiral number is 1.8902. This steel shall be done low temperature charpy V impacting test under EN10025-3 standard, the temperature shall be -20℃, and the impacting energy shall be min 27J

EN10025-3 S420N material is a welded low alloy steel grade. Its mateiral number is 1.8902. This steel shall be done low temperature charpy V impacting test under EN10025-3 standard, the temperature shall be -20℃, and the impacting energy shall be min 27J. For S460MC steel for earth moving machines, S420N steel plate quality, our company will supply various testing for our clients like size and quantity checking, the chemical analysis, ladle analysis, tensile test, impact test, and ultrasonic testing.

Our strutural steel plates are not attacked easily by the chemicals in harsh weather. They are a hard, strong, and durable product. Their characteristics are tested through tests. We perform hardness, pmi, micro, chemical, mechanical, macro, ultrasonic test and more. We pack carbon steel plates, S460MC steel for earth moving machines, hot rolled plates, structural steel sheets safely to maintain their good performance so that they serve longer than usual.

At present, the cutting thickness limit of laser cutting is 20 mm. However, it should be noted that oxygen will be added into the laser beam to cut 20 mm thick S460MC steel for earth moving machines steel plate, which will form a thin oxide film on the cutting surface, which may affect the cutting quality, Therefore, attention should be paid to this point to avoid problems.

To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent S460MC steel for earth moving machines products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the S460MC steel for earth moving machines technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.