Is it reasonable for S960MC steel for construction machinery quenching to get martensite

Standing at a new historical starting point, we adapt to the requirements of supply side structural reform, adhere to the overall strategy of "innovation driven, quality leading, S960MC steel for construction machinery quality improving and efficienc

Standing at a new historical starting point, we adapt to the requirements of supply side structural reform, adhere to the overall strategy of "innovation driven, quality leading, S960MC steel for construction machinery quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the S960MC steel for construction machinery International leading steel materials supplier.

Pickled steel coils are processed by pickling machines to remove the oxide layer. Because of the deoxidation treatment, certain characteristics of the pickled steel coils are more prominent. First, the surface is smoother and exquisite. For products that require the appearance of the steel plates, pickling steel coil is a good choice. Second, the surface of the pickled steel coil is smooth and not easy to oxidize, and it is convenient and quick to paint. Third, S960MC steel for construction machinery, pickled steel coils have high precision.

The chemical composition of Q345D seamless steel pipe is as follows: C ≤ 0.18, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.030, S≤ 0.025, Nb ≤ 0.07, V ≤ 0.15, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.50, Cu ≤ 0.30, N ≤ 0.012, Mo ≤ 0.10, Al ≥ 0.015. S960MC steel for construction machinery, Q345D seamless steel pipe has good comprehensive mechanical properties, low temperature impact toughness, corrosion resistance, cold stamping, machinability and weldability. Q345D seamless steel pipe is widely used in welding structures, such as bridges, vehicles, ships, pipelines, boilers, large vessels, etc..

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.