Introduction of S460MC hot rolled flat

In 2019, the output of pig iron in the world was 1.265 billion tons, with China accounting for 64%; the overseas output accounted for 36% (460 million tons), ranking 86.982 million tons of EU 28 countries, 74.907 million tons of Japan, 74.099 million tons

In 2019, the output of pig iron in the world was 1.265 billion tons, with China accounting for 64%; the overseas output accounted for 36% (460 million tons), ranking 86.982 million tons of EU 28 countries, 74.907 million tons of Japan, 74.099 million tons of India, 73.264 million tons of CIS, and S460MC hot rolled flat 47.521 million tons of South Korea. In the first quarter, the global output was 311 million tons, with a year-on-year decrease of 0.5%, with China S460MC hot rolled flat increasing by 2.4%; the overseas output decreased by 5.4%, Among them, EU decreased by 9.2%, Japan increased by 1.3%, India decreased by 7.7%, CIS increased by 2.1%, and South Korea decreased by 4%.

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

After quenching and tempering, 40Cr alloy steel plate and S460MC hot rolled flat sheet have good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel S460MC hot rolled flat is good. It can be hardened to Ф28 ～ 60mm during water quenching and Ф15 ～ 40mm during oil quenching. In addition to quenching and tempering, this steel is also suitable for cyanidation and induction hardening. The cutting performance is better. When the hardness is HB174 ～ 229, the relative cutting workability is 60%. 40Cr alloy steel is suitable for making medium-sized plastic molds.

If you have any requirements for the mode of transportation of the S460MC hot rolled flat goods, we can also negotiate and meet your requirements. For logistics, first of all, we respect customers' opinions, and then choose the most convenient port and transportation mode with appropriate price for customers.

Mechanical properties of NM360 wear-resistant steel plate: after treatment, various performance samples are taken for testing. It can be seen that the new wear-resistant plate can obtain more uniform mechanical properties in a large size range, which not only has high strength and hardness, but also has high toughness. The S460MC hot rolled flat, wear-resistant steel plate can also obtain different strength and toughness matching through reasonable allocation of carbon, silicon and manganese elements, which can meet different service conditions.

The automobile steel coil and sheets are one of our main steel materials exported to the overseas. For any questions about automobile steel, for example, JIS G3113 SAPH440 S460MC hot rolled flat chemical & mechanical composition, S355MC material specification, S700MC material properties, QSTE 380 TM equivalent, please contact us freely. Our sales person and technician will give you professional answers. And welcome to consult us about automobile steel price.

Both parties shall confirm the S460MC hot rolled flat material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the S460MC hot rolled flat steel plant.