en 10149-2 s315mc steel for auto frame carbon steel usages

Q345qD bridge steel plate stock list: Q345qD size (mm) 14*2680*10100, 14*1230*6300, 10*1800*14000, 16*2200*11300, 16*2200*11400, 16*2200*11600, 21.5*2440*12900, 64*2000*10000, 10*1500*7050, 30*2300*5700, 16*2200*12000, 25*2200*6800, 21.5*2440*4750, 30*230

Q345qD bridge steel plate stock list: Q345qD size (mm) 14*2680*10100, 14*1230*6300, 10*1800*14000, 16*2200*11300, 16*2200*11400, 16*2200*11600, 21.5*2440*12900, 64*2000*10000, 10*1500*7050, 30*2300*5700, 16*2200*12000, 25*2200*6800, 21.5*2440*4750, 30*2300*5800, 16*2200*10800, 12*2440*4850, 21.5*2440*4600, 25*3100*9400, 1, 30*2200*5050.

The steel such as EN 10149-2 S315MC steel for auto frame delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

Laser cutting, it is a specific way of cutting en 10149-2 s315mc steel for auto frame steel plate cutting processing, is also one of the common way of cutting its on the cutting or machining parameters, if you want to get the right number, is that you can adjust these parameters to achieve a goal, adjust a few times more to get accurate numerical right in addition, we also need to know is, the faster the cutting en 10149-2 s315mc steel for auto frame speed, the light intensity is smaller, so, the smaller the laser penetration is, in turn, can control the penetration depth of laser.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.