Do you know S460MC hot rolled flat properties

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the S460MC hot rolled flat project. In response process of customer service center,

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the S460MC hot rolled flat project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of S460MC hot rolled flat customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

Q345E steel is low-alloy high-strength steel with good low-temperature impact properties. The grade of Q345E steel is composed of three parts: Chinese phonetic alphabet representing yield strength, yield strength value and quality grade symbol. Where: Q is the yield strength; 345 is the yield strength value in MPa; E is the grade (passing the - 40 degree impact test). S460MC hot rolled flat, Q345E steel is mainly used in various welding structures, such as bridges, vehicles, ships, pipelines, boilers, large vessels, power stations, workshops, low-temperature pressure vessels, etc.

Penetration testing technology is only suitable for detecting surface defects. It uses penetrant to apply on the surface of the S460MC hot rolled flat steel plate, then wipes the excess penetrant with the cleaning solution, and then smears the developer. The penetrant remaining in the defect is adsorbed by the developing material, so as to observe the shape of the defect and determine the type of defect. This S460MC hot rolled flat method requires multiple wipes before and after the inspection, the process is more cumbersome, and can not detect internal defects and rough and dirty steel plates.

As for Q460 series low alloy steel, there are three quality Grade C, D, E. S460MC hot rolled flat, Q460C steel plates are mainly used in various large-scale engineering structures and light-weight structures that require high strength and large load. Q460C steel mechanical properties: Q460C yield strength MPa in different thickness: ≤16mm: ≥460; 16-40mm: ≥440; 40-63mm: ≥420; 63-80mm: ≥400; 80-100mm: ≥400; 100-150mm: ≥380. The tensile strength MPa: 550-720.Elongation: ≥17%.Impact test: 0 ℃ impact test: ≥34J.

The company's logistics team adheres to the development concept of “gathering advantages, providing superior services, creating value, and leading the market”, and tightly focuses on the strategic positioning of “developing large-scale steel logistics and building large-scale steel supermarkets”. Facing the whole country and integrating into the world to build an "one center, one network" international circulation system. Through the development of 5-10 years, it is expected to form a modern steel industry with annual operating income exceeding 2.5 billion yuan.

Our company has strict quality control standards. If you want to visit our factory, you are welcome at any time! We produce a lot of steel products every month to export S460MC hot rolled flat to all over the world. Because our customers are from all countries, they will order a large number of steel products from our company every month.