Chemical composition of S960MC with EN10204-3.1 certificate equivalent material

Characteristics and application scope of S960MC with EN10204-3.1 certificate, 12Cr1MoV alloy plate:12Cr1MoV alloy plate is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical power station boiler. A

Characteristics and application scope of S960MC with EN10204-3.1 certificate, 12Cr1MoV alloy plate:12Cr1MoV alloy plate is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical power station boiler. At 580 ℃, it still has high thermal strength, oxidation resistance and durable plasticity. The production process is simple, the welding performance is good, but it is sensitive to normalizing cooling speed. Pearlite spheroidization will be produced after long-term use at 580 ℃.

S960MC with EN10204-3.1 certificate, Q345B low alloy plate performance:
1) High strength: Generally its yield strength is above 300MPa;
2) High toughness: The elongation is required to be 15% to 20%, and the room temperature impact toughness is greater than 600kJ/m to 800kJ/m. For large welded components, higher fracture toughness is also required;
3) Good welding performance and cold forming performance;
4) Low cold brittle transition temperature;
5) Good corrosion resistance.

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

We are specialized in offering hot rolled ASTM A516 steel plate, which are used in various engineering applications and can be availed in various grades like carbon steel S960MC with EN10204-3.1 certificate A516 Grade 60 steel plate , A516 Grade 65 steel plate, A516 Grade 70 boiler steel plate, ASTM A516 GRADE 60 plates Trippled Certified, ASTM A516 GRADE 60 Plates Dual Certified. Our boiler plates are available in the form of steel plate, steel sheet, steel sections. If you are interested in S960MC with EN10204-3.1 certificate boiler plate, welcome to contact us.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.