BS700MC steels for automobile structure for pressure vessels

We received new order from Myanmar's Navy. It is about BS700MC steels for automobile structure AH36 marine grade steel plates, which will be used to build ships. This is the third time we supplied marine grade steel materials for Myanmar's Navy.

We received new order from Myanmar's Navy. It is about BS700MC steels for automobile structure AH36 marine grade steel plates, which will be used to build ships. This is the third time we supplied marine grade steel materials for Myanmar's Navy. This time a new delegation team came to visit us and spoke highly about our production lines and our marine grade steel plates performance supplied BS700MC steels for automobile structure to Myanmar's Navy before. Both of us expects a pleasant cooperation.

Our company's business departments are a group of excellent and hard-working employees, who constantly carry out knowledge updating and steel knowledge training every day, only to provide better and professional services to customers.

S35C steel is a high-quality carbon structural steel, which has good plasticity and appropriate strength, good process performance, and acceptable welding performance. It is mostly used in normalized and quenched and tempered states. Grades included in the JIS G 4051 standard: S10C, S15C, S20C, S25C, S30C, S33C, S35C, S40C, BS700MC steels for automobile structure, S45C, S48C, S50C, S53C, S55C, S58C, S09CK, S15CK, S20CK.

T11 steel is a steel grade produced according to American Standard ASTM A213. T11 steel is used for boiler, superheater and heat exchanger tubes with minimum wall thickness. Chemical composition of ASTM A213 T11 steel: C 0.05-0.15, Si 0.50-1.00, Mn 0.30-0.60, P, S ≤ 0.025, Cr 1.00-1.50, Mo 0.44-0.65. Mechanical properties of ASTM A213 T11 steel: tensile strength ≥ 415 Mpa, yield strength ≥ 170 Mpa, elongation ≥ 30%. The main ASTM A213 steel pipe grades are A213 T11, A213 T12, A213 T22, BS700MC steels for automobile structure, etc.

In November of 2015, Thailand one company contacted with us from Internet. They are find the trustable supplier of S355J2H seamless pipe BS700MC steels for automobile structure for there cable car supporter. Due to the special using of the pipes, they are very careful and servious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and proucts quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1400 tons pipe to us directly.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our BS700MC steels for automobile structure products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.