20mm thick S700MC factory direct sales with factory price

15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content o

15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of S700MC factory direct sales and 15CrMo alloy plate is obvious and the weldability is poor. After welding, local high temperature tempering treatment should be carried out. The heat treatment process of 15CrMo alloy plate is as follows: the temperature rise rate is 200°C/h, the temperature is raised to 715°C for 1 hour and 15 minutes, the temperature drop rate is 100°C/h, and the temperature is reduced to 300°C before air cooling.

The company has allocated special environmental protection facilities for all S700MC factory direct sales pollution sources, strengthened the recycling of waste resources and improved the efficiency of resource utilization. At present, the recovery and utilization rate of solid wastes such as iron slag, steel slag, iron bearing dust, S700MC factory direct sales steel mill scale, environmental protection dust has reached 100%.

Rolling steel is the process of pressing to change the shape of the ingot and billet between the rotating rolls. The so-called steel rolling process is a combination of a series of steel rolling processes. The entire rolling production process is always composed of the following S700MC factory direct sales basic processes: ① billet preparation:Including the cleaning of surface defects, the removal of surface scale and the pre-heat treatment of billets. ② billet heating ③ steel rolling: it is the core of the entire rolling production process. ④ Finishing.

Fake and inferior steel plates are easy to scratch because of the simple equipment of the manufacturers of fake and inferior materials, which are easy to produce burrs and scratch the surface of the steel plate. Deep scratches reduce the strength of the S700MC factory direct sales, steel plate. The surface of the fake and inferior material is prone to cracks, because its billet is adobe, which has many pores. The adobe is subjected to thermal stress during the cooling process, and cracks are generated, and there will be cracks after rolling.

The results of adopting two-level S700MC factory direct sales service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and S700MC factory direct sales after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.