2 inch en 10149-2 specification in stock

In order to further transform the operation mechanism, establish the operation concept of "market-oriented, customer-centric", strive to improve our core competitiveness and promote the rapid development of business; further strengthen customer

In order to further transform the operation mechanism, establish the operation concept of "market-oriented, customer-centric", strive to improve our core competitiveness and promote the rapid development of business; further strengthen customer marketing management, subdivide customer groups, establish a top-down, crisscross, hierarchical marketing mechanism of "everyone is a marketer", and provide for the needs of different levels of customers Corresponding services.

35CrMoA steel has high static strength, impact toughness and higher fatigue limit, higher hardenability than 40Cr, high creep strength and endurance strength at high temperature, long-term working temperature can reach 500℃; plasticity during cold deformation Medium, poor weldability. Alloy steel EN 10149-2 specification is used as important structural parts that work under high loads, such as transmission parts of vehicles and engines; rotors, main shafts, heavy-load transmission shafts of steam turbine generators, and large-section parts.

en 10149-2 specification, No.45 seamless pipe belongs to high quality carbon structural steel. The carbon (C) content of No.45 seamless pipe is 0.42 ~ 0.50%, Si content is 0.17 ~ 0.37%, Mn content is 0.50 ~ 0.80%, Cr content is ≤ 0.25%, Ni content is ≤ 0.30%, Cu content is ≤ 0.25%. The tensile strength, yield strength, elongation, reduction of area and impact energy of No.45 seamless pipe are 600 MPa, 355 MPa, 16% and 40% respectively. No.45 seamless pipe is used to manufacture high strength moving parts.

we also provide the en 10149-2 specification welding service for customers, and our welding method, hand arc welding, submerged arc welding and tungsten argon arc welding, melting polar gas shielded welding and so on. And we have lots of successful en 10149-2 specification welding project, such as longitudinal submerged arc welding pipe, welding cross colume, prestressed truss and welding box colume.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.

Keep in mind your mission and never forget your mission." At present, the BEBON steel leadership team unites the majority of cadres and employees to keep in mind their glorious missions, guided by Xi Jinping's ideology of socialism with Chinese characteristics in the new era, fully implementing the spirit of the 19th CPC National Congress, in-depth implementation of the requirements of the "three advances", pioneering spirit, and striving In order to lead high-quality development with innovation, build a new pattern of Anshan Iron and Steel's revitalization and development, strive to build the most internationally influential steel company, and make new contributions to the start of a new journey for BEBON Iron and Steel Group.