10mm thick high quality s500mc en 10149-2 stock

The company now has s500mc en 10149-2 oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff w

The company now has S500MC EN 10149-2 oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than s500mc en 10149-2 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

We have efficient and quick logistic team service. We promise that after the customer places the order, the spot products will be shipped, processed, and cut on the same day. The steel s500mc en 10149-2 products will be shipped in 2-5 days according to the characteristics of the product. The company has always been adhering to the service concept of "integrity, pragmatism, enthusiasm" and dedicated to providing our customers with high-quality steel products and after-sales service.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the s500mc en 10149-2 rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of s500mc en 10149-2 steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

We supply 5800 tons A53 Gr B ERW pipes to Qatar for Qatar Integrated Railway Project - Green Line. This is the first Metro Line in Qatar, and it is located in Doha. We got the order by tender, launched by the Qatar Railways Company for designing, construction and completion of Green Line Project. Before putting order, a delegation from the s500mc en 10149-2 project side visited us and several other famous steel pipe mills in China for 15 days. Finally, we were chosen and finished the task exceeding their expectations.

s500mc en 10149-2 product plate specification range:
Thickness 3-150mm
Width 1500-4020mm
Length 4000mm-17000mm
Heat treatment: annealing, or normalizing and tempering

The company revolves around the long-term strategy of "building a quality base and building a century-long BEBON", adheres to the development ideas of innovation, transformation, and improvement, vigorously promotes transformation and upgrading, structural adjustment, energy conservation and emission reduction, and strives to create high-quality steel with strong core competitiveness and distinctive features The production base has become a green steel city with intensive land use, clean production, efficient use of resources, harmonious and friendly production and environment, business and society, and BEBON characteristics.