Why the use of BS700MC high strength alloy steel is more cost-effective

BBN is a BS700MC high strength alloy steel world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.Manganese steel plate is

BBN is a BS700MC high strength alloy steel world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.

Manganese steel plate is subdivided according to material grade: Q345A, Q345B, Q345C, Q345D, Q345E, BS700MC high strength alloy steel. The main differences according to the classification are as follows: A needs no impact test, B needs room temperature impact test (20 degrees above zero), C needs zero degree impact test, D needs minus 20 degree impact test, and E needs minus 40 degree impact test. The most important characteristic of manganese steel plate is that under the condition of strong impact and extrusion, the surface layer rapidly hardens, but the core still maintains good toughness and plasticity, and the hardened layer has good wear resistance.

Both 14Cr1MoR pressure vessel steel and 15CrMoR pressure vessel steel belong to Cr-Mo hydrogen resistant steel, and they are special steel in strict sense. BS700MC high strength alloy steel, Cr-Mo hydrogen resistant steel is suitable for petrochemical, nuclear power, steam turbine cylinder block, thermal power and other large-scale equipment with high temperature and high pressure and connected with hydrogen or hydrogen mixed medium. Moreover, 15CrMoR pressure vessel steel has high endurance strength below 550 °C.

30CrMo 35CrMo 25CrMo4 42CrMo4 and so on CrMo steels have good mechanical properties and hydrogen resistance at room temperature and high temperature. The main alloy elements in CrMo steel are molybdenum, chromium, vanadium, silicon, boron, etc. Molybdenum is a very important alloy element in the hot strength steel. It can significantly improve the hot strength of the CrMo steel, maintain sufficient strength at high temperature, refine the grains and prevent the overheating tendency of the CrMo steel, BS700MC high strength alloy steel.

T11 steel is a steel grade produced according to American Standard ASTM A213. T11 steel is used for boiler, superheater and heat exchanger tubes with minimum wall thickness. Chemical composition of ASTM A213 T11 steel: C 0.05-0.15, Si 0.50-1.00, Mn 0.30-0.60, P, S ≤ 0.025, Cr 1.00-1.50, Mo 0.44-0.65. Mechanical properties of ASTM A213 T11 steel: tensile strength ≥ 415 Mpa, yield strength ≥ 170 Mpa, elongation ≥ 30%. The main ASTM A213 steel pipe grades are A213 T11, A213 T12, A213 T22, BS700MC high strength alloy steel, etc.

We have a professional production team and high-quality production equipment, and we also have a great BS700MC high strength alloy steel advantage in price, with its own factory, large-scale production to reduce the price. Strictly control each production line to ensure the BS700MC high strength alloy steel production of high-quality steel plates, steel pipes and other products that meet customer requirements.

The after-sales service department will pay return visit to each customer by call or email, report problems found during the return visit in time, and discuss with the production and quality inspection center to propose effective solutions and follow up in a timely manner, so as to ensure the benefits each customer are fully guaranteed, and to provide customers with more value-added services.