What are the main characteristics of pickled steel sheet s420mc

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us pickled steel sheet s420mc specific data and requirements, our technical department can make design and drawing for you, and then confirm with you

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us pickled steel sheet S420MC specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

The yield strength of Q690D steel plate is 690 Mpa and the impact temperature is - 20℃. pickled steel sheet s420mc, Q690D steel plate has high strength, good plasticity and toughness, good weldability and good cold and hot performance. Q690D steel plate is mainly used to manufacture various large engineering structural components and construction machinery. Because of its high strength and good toughness, Q690D steel plate can reduce the self weight of components and meet the requirements of large-scale and lightweight engineering components and equipment under the condition of ensuring strength, stiffness and reliability.

A514 gr.A steel coil chemical composition (melting analysis)%
C: 0.15-0.21, Si: 0.40-0.80, Mn: 0.80-1.10, P max.: 0.035, S max.: 0.035, B max.: 0.0025, Cr: 0.50-0.80, Mo: 0.18-0.28, Zr: 0.05-0.15
The mechanical properties in thickness (mm)T≤65
Yield strength (≥Mpa): 690
Tensile strength (Mpa):760-895
Elongation in ≥,%: 18

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.