We are Ready For any places moving!

Is s460mc mechanical properties hot or cold rolled?

Is s460mc mechanical properties hot or cold rolled?

BBN steel company was founded in 2000, starting the international business in 2010 and successfully being approved and certified by ISO9001:2008. After ten years development, BBN steel has become the large-scale comprehensive enterprise group, combining s

Is s460mc mechanical properties hot or cold rolled?

BBN steel company was founded in 2000, starting the international business in 2010 and successfully being approved and certified by ISO9001:2008. After ten years development, BBN steel has become the large-scale comprehensive enterprise group, combining steel trading, S460MC mechanical properties plate processing, and steel distribution, also have large warehouse and processional representatives both inTianJin, Zhengzhou and Beijing city.

Welded steel pipes are made by crimping steel plates, bending them into a circle, and then welding the joints together. Seamless steel pipe is directly processed by round steel piercing or hot rolling process, so there is no weld on the outer surface. The performance of seamless steel pipe is better than that of welded steel pipe, and the price of seamless steel pipe is also higher. There are some differences in chemical composition between s460mc mechanical properties, welded steel pipe and seamless steel pipe. The material of welded steel pipe contains the chemical composition suitable for welding.

The wear-resistant plate s460mc mechanical properties shows good wear resistance: the chemical composition of the alloy layer contains 4-5% carbon and 25-30% chromium. The volume fraction of Cr7C3 carbide in the metallographic structure is more than 50%, the macro hardness is HRC56-62, and the hardness of chromium carbide is HV1400-1800. Because of the vertical distribution of carbides in the wear direction, the wear resistance of the cast alloy with the same composition and s460mc mechanical properties hardness is more than twice as that of the cast alloy with the same composition and hardness. Compared with several typical materials, the wear resistance is as follows: (1) compared with low carbon steel; 20-25:1 (2) with as cast high chromium cast iron; 1.5-2.5:1.

The martensite microscopic strength of the wear-resistant layer of the s460mc mechanical properties, wear-resistant steel plate can exceed HVl700-2000, and the surface strength can exceed HRC58-62. The key to the wear-resistant layer of the wear-resistant steel plate is dominated by cobalt alloy, and other alloy components such as manganese, molybdenum, niobium, and nickel are added. The martensite in the alloy composition is filled with fibers, and the orientation of chemical fibers is vertical to the surface.

The proportion of main elements in Q345 steel is basically the same as that in 16Mn steel, the difference is that V, Ti, Nb microalloy elements are added. A small amount of V, Ti, Nb alloy elements can refine the grains, greatly improve the toughness of the steel, and greatly improve the comprehensive mechanical properties of the steel. Because of this, the thickness of s460mc mechanical properties, Q345 steel plate can be made larger. Therefore, the comprehensive mechanical properties of Q345 steel should be better than that of 16Mn steel, especially its low temperature properties. The allowable stress of Q345 steel is slightly higher than that of 16Mn steel.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our s460mc mechanical properties products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel s460mc mechanical properties plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.

Leave a message

Your email address will not be published. Required fields are marked *